Boats - Fibreglass - Recreation - Commercial - Boating - Gold Coast - Australia

Voyager 6.8m
[Entry] [Seafarer Main] [News] [Our History] [Dealers] [Options] [Request  Brochures] [Contact Us]

 SPECIFICATIONS

  • Centre-Line Length: 6.8m
  • Maximum Beam: 2.5m
  • Weight: 1600KG Approx.
  • Dead-Rise: 22º
  • Maximum Power Twin: 150HP
  • Max Engine Weight: 390Kg
  • Transom Height: 25”
  • Load Capacity: Nine Adults
  • Length Overall on Trailer Including Engine: 8.5m
  • Overall Height on Trailer: 3.3m
  • Width On Trailer: 2.5m

 

 

VOYAGER 6.8

The 6.8m Voyager Centre Cab is the jewel in the crown of the current Seafarer range of fibreglass boats.
  Not only does it draw on the intense development programme that has been going on for several years, producing award winning models such as the Viking, Victory, Viper and Vagabond, it also breaks new ground in many areas to lay claim to being the most sophisticated trailerable fibreglass boat available today.
Centre cabin models have been in vogue for several years now, but so far little advantage seems to have been taken of the many unique design and layout opportunities presented by the centre cab concept. Most are built with the floor and cabin created out of a single mould. The Voyager is constructed with separate hull, floor and cabin moulds, allowing far more intricate design elements to be introduced. Not the least of these, is the fact that the floor liner is reinforced and has closed cell positive foa flotation located under the floor and not down in the bilge where the foam can be degraded and lose its efficiency.
This is a boat that can comfortably take on long range open sea work, so the entire construction and internal design has been beefed up considerably to ensure that it does so with very high safety margins.

STANDARD EQUIPMENT

  • Single Tone Hull & Deck
  • Colour Flash on Cabin Side
  • Custom Striping
  • Moulded Bow Sprit
  • Double Bow Roller & Cross Bollard
  • Anchor Well with Separate Hatch
  • Opening Front Cabin Hatch
  • Wrap-Around Glass Windscreen with Stainless Steel Grab Rail
  • Provision with Porta Potty
  • 2m Cabin Bunks with infill Cushion
  • Cabin Bulk Head with Curtain
  • Fixed Cabin Windows
  • Passenger Side Glove Box with Padded Coaming & S/S Grabrail
  • Side Pockets with Padded Coamings & Rod Storage Racks
  • Open Helm & Navigator Seats on Swivel Pedestals
  • Two -Piece Rear Folding Seats with 2” Padded Base
  • 340L Plastic Fuel Tank & Deck Filler
  • Dual Delkor Heavy Duty marine Batteries with S/S Hold Down & BEP Battery Iso Switch
  • Dual Hydraulic Steering with Sports S/S Cruiser Steering Wheel
  • Factory Pre-Rigged / Dealer Supply
  • Seafarer MT-220T-EH Tandem Tinka Classic Trailer (Refer to Specifications), Includes: Sensa Brake Car Kit , Walk-Way & LED Lights   
  • Stainless Split Bow Rail
  • 4x Recessed Cockpit Side Stainless Steel Grab Rails
  • Four Stainless Steel Rod Holders
  • Large Recessed Rear S/S Cleats
  • Large Plumbed Kill Tank
  • 2x Insulated Floor
  • Large Rear Storage Wells with Lids
  • Moulded Half-Pod
  • Transom Boarding Platforms with 2x S/S Stays & Flush Mounted S/S Boarding Ladder
  • Thru- Hull Transducer
  • Port and Starboard Lights
  • Folding S/S Targa with 4 Rocket Launchers with Inserts
  • 100% Acrylic Canvas Bimini with S/S Bows & Knuckles
  • Front & Side Clears
  • Storm Cover
  • Targa Fluro & Riding Light
  • Flush Mount Compass
  • Furuno 7000 Colour Sounder/GPS
  • GME GX-600 VHF Radio with Aerial
  • GME CD Stereo AM/FM with Aerial
  • Cabin & Cockpit Lights
  • 2 Pin 12 Volt Outlet
  • Wiring Loom & 9 Pos.Switch Panel
  • Johnson 1150 GPH Bilge Pump with Electronic Automatic Float Switch
Seafarer Boats Australia - the finest boats built

ABN: 43 009 756 478

ACN: 009 756 478

Seafarer Boats Australia - the finest boats built